비데 필터 교환 Bidet filter replacement

It has become common now to install bidets in homes or offices for clean and convenient toilet use. However, if not managed properly, the electricity bill will be rather high, but the advantages may not be enjoyed properly. We looked at how to clean the bidet nozzle that can be done by yourself, filter replacement cycle, and other maintenance methods.

비데 필터 교환

 

 

Bidet filter replacement cycle
Recommended replacement cycle: 4 months 비데 필터 교환
It is recommended to replace the filter used in the bidet once every 4 months. If the filter is not replaced with a new filter despite the expiration of its service life, clean cleaning is not possible because the cleaning water is discharged in an unfiltered state. Also, if the filter is old or clogged, the water flow itself may not come out or it may spray weakly. 좋은뉴스 

 

 

 

How to replace the bidet filter
Unplug the power cord and be sure to lock the water supply band.
Turn the filter clockwise and remove it.
Replace the new filter by turning it counterclockwise to secure it.
Open the water supply valve and plug in the power cord to use the device.
Replacing the bidet filter is simple. The small bottle-shaped part attached to the side of the back of the bidet is the filter. After confirming this, first plug in the power plug and close the water valve to prevent water from coming out. Then, remove the filter from the cap by turning it clockwise, and insert the new filter by turning it counterclockwise. Once installed, you can open the valve, plug in the power and continue using it.

 

 

 

 

How to clean the bidet nozzle
Press and hold the power button to turn off the product.
Press the [Nozzle Cleaning] button.
The cleaning nozzle comes forward and cleans it when the cleaning water is sprayed.
After cleaning, press the [Clean Nozzle] button once more.
The bidet nozzle comes forward and cleans it when the washing water is sprayed.
Finally, press the [Nozzle Cleaning] button one more time or end the operation in that state.
Next, we’ll show you how to clean the bidet nozzle part. Before cleaning, the machine must be turned off by pressing and holding the power button. After that, press the [Nozzle Cleaning] button. Then, the cleaning nozzle for cleaning comes out and sprays the cleaning water. At this time, clean the cleaning nozzle by wiping it with a brush or soft cloth.

 

Then, if you press the [Clean Nozzle] button once more, the cleaning nozzle that came out returns to its original position, and this time, the bidet nozzle comes forward and sprays washing water. The bidet nozzle that comes out is also cleaned by wiping it clean. After cleaning all the nozzles, press the button again to restore the bidet nozzles. Even if you do not press any button, the nozzle automatically returns when not operated, so you can leave it as it is after cleaning.

 

 

 

It is drawn as an illustration of a bidet-nozzle-cleaning-button-pressing-and-cleaning-with-brush.
How to clean the nozzle
※ (Source) Coway website

https://www.coway.com/

 

The nozzle is thin and light, so it is easy to break or crack and damage it if you wipe it with excessive force. Be careful to support the bottom with one hand and lightly wipe it with the other hand to clean. Also, when cleaning, you should not use a rough brush or scrubbing brush, and it is better to check thoroughly to see if there are any foreign substances. This is because it is a part closely related to water pressure or performance.

 

 

 

 

Other management methods and precautions
When not in use for a long time, unplug the power cord, close the water valve, and empty the water tank.
Install the product by plugging in a dedicated outlet in a place that is free of moisture and low dust.
The raw water is connected to the cold water pipe.
Be careful not to get foreign substances such as urine on the nozzle or hot air outlet.
When cleaning, do not spray water or detergent directly.
We will briefly look at other cleaning methods and precautions that are useful to know. First of all, if you are not going to use the bidet for a long time due to business trips or travel, remove the plug, close the valve, disconnect the bidet hose, disconnect the device, and then empty the water tank. When emptying the water tank, hold a basin or basket as a support and turn the stopper counterclockwise to open it.

 

When installing the product for the first time, select and install the product in a place with little moisture or dust, no splashing of water, and no direct sunlight. Avoid using a multi-tap, and it is safe to use it alone by plugging the power into a dedicated outlet that can be grounded. The raw water must be connected to the hot water pipe, not cold water. If possible, ask a professional engineer for installation and relocation.

 

During use, be careful not to get foreign substances on the nozzle or the air outlet, and clean it frequently. When cleaning, you should choose the method of wiping with a toothbrush or cloth, not the method of spraying water or detergent. Even good cleaning and daily maintenance can solve symptoms of malfunction and improve performance.

 

 

 

 

Men and women-toilet-marks are drawn-picture-background-above-the-title-is written.
Bidet filter replacement, nozzle cleaning
Above, we looked at the bidet filter replacement cycle, how to clean the nozzle, and how to manage it. If a large number of products are installed, such as in a company or public institution, regular maintenance is often carried out by an expert, but in the case of a home or small office, the number of products is small, so self-management is sufficient. I hope you can use it in a clean and pleasant way by managing the bidet smartly.